15-18 size Quick Worldwide Helicopter and Electric EP

Under build section

SAB 0412 Tail blades

72mm long blades with a cord of 26mm. Designed for a grip width of 5mm. Made from Carbon finished with a white coat as shown. Ideal for EP10/quickie or smaller size helicopters below 30 size.

SAB0412
Weight: 0.20 kg

12 T Sprial cut gears for EP10 and deluxe

A new complete gear set for the EP10 or EP10 deluxe comprising of main gear, tail gear box gear and pinion at 12T. These gears are hard wearing and very low noise when we tested them against the stock gears. The main gear is made from Delrin material and the other 2 gears are made from Brass. Very low axial loads are experienced using this form of gearing.

HEP0050E12
Weight: 0.20 kg

EP10 standard or deluxe steel pinion upgrade

A new steel pinion for the motor (5mm) which lasts longer than the stock pinion. Available as either 10 or 11 Tooth. Sold seperate

HEP0060E Pinion
Weight: 0.20 kg

sprial cut main gear replacement (main gear only)

A upgrade sprial cut delrin main gear for the EP10 or Quickie 18. Can also be used on the Sweet 16

HEP0050A
Weight: 0.20 kg

Replacement/alternative pinion for sprial cut gears

13T or 14T gear for delrin main gear set to allow ratio change. price per gear.

HEP0050E13 or E14
Weight: 0.20 kg

carbon boom for EP10 or Quickie 18

A carbon boom for the above helicopter. It is necessary with epoxy your existing boom end socket to the boom before fitting. The existing can be removed with heat from the metal boom.

QT154C
Weight: 0.20 kg

QH156A ALI blade upgrades with bearings for EP10

QH156A
Weight: 0.20 kg

QH150 Feathering Spindle

QH150
Weight: 0.20 kg

QT174C Carbon fin set

A carbon fin set for the EP10 or quickie 18

QT174C
Weight: 0.20 kg

QT160A Ali fin mount in blue

A ali fin mount for the boom of an EP10 or Quickie 18 finished in blue.

QT160A
Weight: 0.20 kg