Tools

Gas soldering Iron - Field version

A useful soldering iron for the field as its powered by butane (gas lighter fuel). The head contains a catalyst so there is no flame. This unit is able to reach 1300 oC when the catalyst is at temp and the flame has stopped. A soldering tip is supplied that can be fitted to the head of the unit. Please note unit is not charged with gas or solder which can be obtained via most local DIY shops.

YT72
Weight: 0.20 kg

Metal CNC hex drives

A set of 4 off CNC light weight hex drives with dual ends to allow the inserts to be swapped upon end wear. Large handle for ease of use. 4 Supplied in the kit 1.5mm, 2mm, 2.5mm and 3mm.

HHI7332
Weight: 0.20 kg

Electronic Caliper set

Need to check a shaft size or adjust a CCPM rod length to within 0.01mm? This is the unit for you, slide the calipers around the item and read the digital readout. Supplied with battery and zero reset system . Can measure internal and external dims via the twin caliper system (top and bottom).

N48AA
Weight: 0.20 kg

Remote control helicopter Ball link pliers

A universal ball link plier set to allow removal and refitting of ball links. Tool is finished with red moulded handles.

UHHS309 Ballllink
Weight: 0.20 kg

Heavy duty Z Benders

A heavy duty Z bender for forming Z shapes in push rods where the metal rods change direction. Long handles allow toughened rods to be altered. General use servo output rods and tail push rods. Also used on planes for forming bends for connection to servo horns and arms.

UH00045 Z Bender
Weight: 0.01 kg

Piston locker for Remote control helicopter glow engines

A locker that is located via the glow hole on the engine to allow the engine to be locked when installing the fan etc. A dust cap is also provided to protect the end of the tool and threads.

UHE010PistonLockerPV0205
Weight: 0.01 kg

Plastic cutting scissors

Special curved scissors for cutting screens on helicopters ie plastic trimming. These are angled to assist to cutting angles and radius

UH0109SCISS
Weight: 0.01 kg

Ball end adjusters for remote control helicopters.

NEW STOCK

A pair of plastic moulded ball link holders which allow you to alter the length of ball links on rods on your helicopter. Supplied in a pair for double ended link rods.

UHB001
Weight: 0.01 kg

Metal handle hex drivers metirc set of 4

A metal finished set of 4 x (Cap head) screw drivers complete with ali machined handles which are over sized to allow added purchase on the cap head. These are complete with German shafts and tips.

HHI7307
Weight: 0.01 kg

TT1263 model plane and helicopter starter box set

A ideal for the beginner starter field box set containing all required for the field:-

4-way wrench

3 liter fuel tank

glow starter/charger

12v starting battery/charger

12v HD starter

12v fuel pump

recoil fuel tubing

Screw Drivers

Starter shaft not supplied (shaft connected between the heli and electric starter)

TT1263 Carry master
Weight: 10000.00 kg

Mini socket set

A complete metric mini socket set as shown. Complete with extension bar to reach those difficult to get to nuts. Ideal on nylon nuts etc. 7,8,9,10,12mm sockets supplied.

UH3853
Weight: 0.10 kg

Wiha Hex Allen Key drive set

A complete set of top quality German tools (Hex keys) with a tool tray and multi angle ends. Used by most of the top helicopter pilots. Sizes supplied 0.9mm, 1.3mm,1.5,2,3,4. Complete with rotating caps. An ideal present.

WIHA264K6
Weight: 0.10 kg

Wiha Hex - allen key drivers

A top quality tool with a soft finish handle and large grip to free off those lock tight hex nuts. Multi angle head. Made with toughened tips to provide a long service life. 7 Sizes (see drop down menu).

WIHA 367
Weight: 0.10 kg

Ball end adjuster pack of 2

Metal ball link adjusters. Supplied in pairs to ease that pain on the fingers when setting up the link lengths. Made from Metal so they will never wear or split.

HHI7050
Weight: 0.10 kg

4 way wrench

A 4 way metric wrench that can be used to hold nuts while tightening. The unit is also complete with a glow plug remover and a glow plug holder. (glow plug shown not included).

TT1102
Weight: 0.10 kg

Paddle Gauge

comprises of 2 off composite paddle gauges to allow allignment of paddles on your helicopter. Will fit most standard paddles.

HHI7000 paddle
Weight: 0.10 kg

Century Pitch and Paddle gauge combi

A high quality combi set of pitch and paddle gauge (1 off each). Complete with instructions for use. Photo shown packed and unpacked.

CN2026
Weight: 0.20 kg

remote control helicopter pitch gauge

A pitch gauge offering a close degree of reading for main blade pitch range setup.

HHI7001
Weight: 0.10 kg

Pitch Gauge for remote control helicopters -15 to +15

Simple to use pitch gauge fo remote control helicopters complete with flybar viewing windows to ensure all is square when taking off readings. Scale -15 to +15. Blade clamp adjustable to suit cord of blade.

UHAK0060B
Weight: 0.01 kg

Field digitial test meter.

An ideal field tester which will display AC/DC voltage, resistance, power consumption up to 10A DC current. Complete with battery and test leads.

UHQT18
Weight: 0.20 kg

Shaft and ball link checker

Ideal for checking shafts that could have been bent in a crash. 4 sizes of holders supplied to fit most shaft sizes. 4 x ball link connectors for setting rod lengths on helicopters. Does not include gauge or mag stand which can be purchased seperate from Cromwell tools for approx £45.00

HHI7005
Weight: 0.10 kg

C Clip removers and installation pliers

C - Clip pliers for removal of clips on auto units, tail pins and general parts of the heli where C clips are installed.

UH007-10 C Clip
Weight: 0.20 kg

Reamer Tool

A very sharp cone cutter which can be used to enlarge holes, make countersinks for flush mounting holes and also de-buring drilled holes. Ideal for use at the field where no power for drills etc are available. Multipoint cutter blade.

UH1039 Reemer
Weight: 0.10 kg

Hex driver set

A metal handled set of hex drivers with coloured handles. Sizes 1.5mm, 2mm, 2.5mm, 3mm

UH002-3
Weight: 0.10 kg

Compact Reamer Tool

Ball link Lifters

Budget ball link lifters.

T-ML50
Weight: 0.20 kg

75mm length glow plug spanner with T handle

L-SPA003
Weight: 0.20 kg

File Set

A set of small files for model engineering use. Ideal for the kit box to remove the burrs!

KW26D
Weight: 0.20 kg

Hex Driver set

Metal Handle pro driver set. Large handle grip

D029
Weight: 0.20 kg