A complete helicopter kit comprising of:-

• Transmitter
• Receiver
• Mixer
• TX/RX Crystals
• Gyro
• Servos
• Helicopter with motors
• Battery pack for the TX and RX (dry cells only provided for the TX)
• Charger
• Full manual

Limited on budget then this is the heli for you. £525.00 all in + P&P.  This is a great entry level machine and ideal for the beginner being easy to build with good detailed instructions.

Within the kit you will receive:-

Hi-tec digital ecilpse radio with 5 servos

Gyro - CSM 180

Starter, start shaft and glow driver

Thunder Tiger engine, glow plug and exhaust

Add fuel, 12volt battery and you are away!

 Featuring 31 Ball Bearings. It's a GREAT Beginner Helicopter. It is easy to build and can be assembled and almost ready to fly in less than 6 hours. Main mechanics, rotor head and tail gear box come pre-assembled. Even the push rods are pre-assembled. Although it is a great beginner helicopter, it is still very 3D capable. This is truly a new breed of a beginner model. Once again Century has re-defined the R/C helicopter industry with a quality helicopter of exceptional value and at a very affordable low price. Not to mention it's compatible with all of Century's Scale

Raptor 90 4890 K10 STD kit with full ball bearings, no engine, no muffler no blades are supplied.  It comes stock with metal swashplate (PV0384), carbon base plate (PV0327), header tank (PV0311), metal washout base (PV0291) & metal tail pitch control fork (PV0424), 11T and 12T pinion gears. The new metal upper and lower frames, landing skid pipes, tail boom and tail support rods are anodised in bluish dark grey. New decals are included. Fan casing and servo mount is modified to allow mounting of the larger heat sink head on the OS91 C-Spec engines. The Raptor 90 STD has also a longer tail boom with a longer dual bearings tail drive shaft and longer tail control pushrod. The tail drive shaft has pin holes on each drive end to allow securing with supplied bolts and nylocs.
The newly designed main rotor hub features a metal collared mount for the main shaft and stiffer 70 degree durometer dampers as stock with new style flybar control arms where different ball link positions allow you to select F3C or 3D stlyes.

The complete package to get you in the air.  Kit comprises of good quality parts and online support. Comprises of:-

• Raptor 30 V2
• Thundertiger Heli engine
• Fuel pump
• Electric starter
• Starter shaft
• Wood blades
• Glow driver and charger
• Training undercarriage
• CSM Heading lock gyro - 200
• JR2610 NEW JR complete radio (servos x 5, TX,RX and chargers)

Ultimate Helicopters will also check over and test fly in Leicester if you bring the kit to us after building.  We offer full on-line and phone support also to help you with your helicopter.  Please note that this deal comprises of good quality parts and buddy box radio to allow you to join to another JR radio for teaching.   You will need a 12volt power supply for the starter which is not included due to shipping chemicals (acid).  These can be purchased with ease at any Maplin Electronics or equal type store.

The complete package to get you in the air.  Kit comprises of good quality parts and online support. Comprises of:-

• Raptor 50 V2
• Thundertiger Heli engine
• Fuel pump
• Electric starter
• Starter shaft
• Wood blades
• Glow driver and charger
• Training undercarriage
• CSM Heading lock gyro - 200
• JR2610 NEW JR complete radio (servos x 5, TX,RX and chargers)

Ultimate Helicopters will also check over and test fly in Leicester if you bring the kit to us after building.  We offer full on-line and phone support also to help you with your helicopter.  Please note that this deal comprises of good quality parts and buddy box radio to allow you to join to another JR radio for teaching.   You will need a 12volt power supply for the starter which is not included due to shipping chemicals (acid).  These can be purchased with ease at any Maplin Electronics or equal type store.

A velcro strap system with a strong plastic hoop to allow you to alter your straps to retain the component. Easy to install and remove.

General uses:-

Receiver packs, Battery packs for flight packs

Receivers and receiver strong boxes/crash boxes

Large bundles of cables.

Price per strap.  Length 305mm.  Retaining length approx 250 mm max.

A velcro strap system with a area to allow a fixture to your helicopter if required.  The hoop length can be altered to most sizes and the remaining velcro can be cut off.  Due to being very soft the material minimises the allowance for cable rubbing when under flight loads which can be experienced with cable ties.

General uses:-

Cables and wiring retaining systems.

Large bundles of cables.

General light items that require retaining.

Price per strap.  Length 203 mm. 

A header tank complete with clunk, clunkline, ali brace and 2 oz tank. 

Sold in a box of 4 (4 x US gallons). This fuel offers very good lubrication and power for any glow engine.  Shipping inc within price.

A analogue meter for checking battery capacity for either 4 cell or 5 cell configurations.

Socket type is a dual pin to allow connection to most battery sockets.  Large scale meter for easy reading.

The unit is presented in a metal colour case with a nice large clear dial viewing window.

A clear plastic case is provided to protect the unit in transit.

A IC driven volt checker providing 10 output lamps for battery status on your helicopter or plane. Plugs into a spare channel on your receiver.  2 mounting gromets are provided with the unit as standard.

A Taco that can be mounted on the boom of a Helicopter complete with a large display.

The taco has the following features:-

• 2, 3 or 4 blade selector. *Plane or Heli*
• Internal Battery or remote connection via spare servo channel
• Can be boom or used by hand
• Large display
• Mounting boom kit supplied for all sizes