Servos

Futuba 9202 servo

Coreless servo offering 0.22s to 60 degree and 5 KG pull. Ideal for CCPM helicopters where precise control of the swash is required.

P-S9202
Weight: 0.20 kg

Futuba 9254 high speed tail servo

Very high speed tail servo, new to the market place. 4.8 KG/0.06 seconds! at 4.8 Volts.

P-S9254 Servo Ripmax
Weight: 0.20 kg

JR810G Tail servo for remote control helicopters

A high speed servo for tails on helicopters. Offers 2.5 KG pull and a 60 degree speed of 0.10s. Very fast and ideal as an upgrade.

810G tail servo
Weight: 0.10 kg

HS225BB Servos Hi-tec remote control application servo

Torque 4.7 kg

Speed 0.11 to 60 degrees.

Dims 32.4mm x 16.8mm x 30.8mm

Weight 31g.

Used on the quickie Electric helicopter and also for general use.

HS225BB servo
Weight: 0.31 kg

HS5245MG digital servo

Digital servo ideal for super response for the EP range of helicopter EP10 or EP10 deluxe. Can also be used for other applications such as small planes or small helis. 5.5 kg at 0.12 to 60. Weight 32g. Dual bearings with 3 off pole motor. Metal gears. 32mm x 17mm x 31mm.

HS5245MG
Weight: 0.20 kg

JR8700 Tail servo

A very high spec tail servo for remote control helicopters.

8700G High Speed Super S (PCM Only)

The ultimate tail rotor servo. The 8700G offers a speed of .09 second transit at 4.8 volts. Wider spaced bearings offer superior wear characteristics and precision. The 8700's unsurpassed precision and speed are essential for accurate tail control when used with heading-lock style gyros.

Torque: 49.9 oz/in 3.6 Kg/cm

Speed: .09/60 seconds

Weight: 2.11 oz

Size: .75"x1.54"x1.36"

Motor: Coreless

Ball Bearing: Dual

JR8700 Tail servo
Weight: 0.10 kg

JR591 Servo for remote control application

A standard servo for general 30 size application 5.1 Kg/cm, 0.24 sec/60 deg

JR591
Weight: 0.10 kg

JR DS 811 servos

An entry level digital servo ideal for the CCPM helicopters or normal helicopters for the head controls.

4kg pull and 0.21 secs to 60 degrees.

811 servos
Weight: 0.10 kg

JR NES 321 Servo

Mini servo as used on the EP helicopter or equal. Ideal for this type of application with 2.3 kg pull. 0.23 seconds to 60 degrees. Weight 22g, size 26 x 15 x 33 mm

JR 321 servo.

JR 321 servo
Weight: 0.10 kg

JR331 Servo

A JR servo size 30 x 13 x 28.5 mm. 3.1 kg with a speed of 0.28. Weight is 17g per servo. Servo classed as sub miniature size

NES331
Weight: 0.20 kg